Crane Inspections
-
-
Hews Crane Inspection Checklist
- Grease and lube crane, boom, & outriggers.
- Separate PTO and Pump, inspect splines for wear.
- Review and test all electronics and safety components. (varies by crane mfg.)
- Perform load test, confirm all cylinders hold load, & OLP is operational
- Check all hoses and fittings for wear and/or leaks.
- Inspect all hose trays/socks/e-chains/ETC. for damage or excessive corrosion.
- Inspect all valves for leaks, scoring, damage of spools, or excessive corrosion.
- Check all safety decals, load charts, lever ID tags for proper placement & visibility.
- Inspect all wear pads in boom and outriggers.
- Check all pins, bushings, bearings and document base bearing tolerance.
- Check fork attachments (Pads, Pins, Rollers, Retainers, Cylinder, Rotator)
- Verify Functionality of: Remotes, Horns, Alarms, Indicators, Lights, Safety Protocols.
- Check dump valves.
- Replace all hydraulic filters, change oil or top off oil as needed.
- Change gear oil crane base (Hiab Cranes only)
- Plug laptop into crane, reset counters, check for errors, save SAC file.
- Review tag axle, body mounts,
- Provide complete inspection report & put inspection sticker on crane.
- Save all documents and electronic files in records database.
- Review any deficiencies & recommendations with customer.
- Review any other recommended items identified by crane manufacturer.
- Customer must review & approve any additional work outside of Inspection/PM.